EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller can be a very effective solar controller made for off-grid photo voltaic techniques. Depending on multiphase synchronous rectification technological innovation, it assures optimized Power conversion and procedure security for a wide range of photovoltaic (PV) purposes.
Crucial Features with the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Charge Controller technological innovation for top-quality photo voltaic Electricity harvesting. Vital attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for enhanced battery existence.
LCD Show with genuine-time information monitoring.
Multiple Load Control Modes such as manual and timer.
Extensive Digital Protections in opposition to overcharging, about-discharging, short circuits, and reverse polarity.
Step-by-Step Guideline to Setting Up the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Assure all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Verify the model amount and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Decide on a properly-ventilated, dry spot near the battery lender.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by proper protection protocols and make sure the technique is powered off prior to connecting factors.
Move 1: Join the battery terminals towards the demand controller (beneficial to constructive, unfavorable to negative).
Move 2: Connect the solar panel array to your PV input terminals.
Step three: Hook up the load terminals if employing a immediate load link.
Stage four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Command.
five. Monitoring and Facts Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Info is usually logged by means of the RS485 interaction port working with software like Solar Station Laptop.
Remote checking is feasible with the EPEVER WiFi module.
6. Troubleshooting Common Click Here Difficulties
Problem one: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings while in the menu.
Great things about the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Reduced Vitality losses during conversion.
Improved Trustworthiness: Stable functionality less than variable loads.
Extended Battery Lifestyle: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is really an exceptional choice for optimizing solar energy generation and lengthening battery life. By adhering to the above mentioned setup guideline, end users can be certain optimum effectiveness and procedure longevity.